Pantabox

Inro offers with the Pantabox A modern charging solution that via OCPP interface and our back end can load excess PV stream into your car from your solar system.

Preparation

Around the Pantabox It is necessary to connect with us to activate the OCPP backend of the Wallbox.

 

Before starting the facility you have to Connect the Internet via WLAN And install the latest updates.

 

In order to set up the OCPP baking, access to the Pantox apps necessary.

 

Furnishings

1. Add a new wall box on our app and choose it Pantabox out of.

 

2. If you put on the wallbox with us, then you will be your individual in the Wallbox menu OCPP-URL displayed.

Copy the OCPP-URL and put them in the Pantabox.

 

3. Open yours Pantox apps and go to the menu [Manage charging profile].

4. Select the charging profile [clever-PV] out of

5. Add the copied OCPP URL from our app and click on [Save settings].

6. Then click on the [Diskette] And store your loading profile.

7. Activate the charging profile

 

 

8. Die Pantabox connects to the backend

8. Change back to our app, there the Pantabox Among the OCPP the connector on. Willing the provisions and click on [Further].

9. Complete the facility

 

Under some circumstances, it can happen that the wall box is displayed as offline after the facility, wait Kurz or make a refresh to update the display.

 

Now you can have your wall box controlled automatically and load cheap solar power into your car!